Custom Multi Message Signs
JACKWIN offers multi message signs with various images and applications, including lane status, road conditions ahead, construction status, and more. We supply PP fluted plastic and aluminum sheet as base materials of multi message signs with 3M Diamond Grade/Engineering Grade/HIP retroreflective for Class 1. Additionally, two or three panels assembled from low-density steel frames, high-density steel frames, and high-density aluminum alloy frames are available for selection.
Our factory provides OEM and ODM services for image customization tailored to your engineering and procurement needs. If you are a government procurement officer, retailer, or contractor requiring diverse information alerts on complex road sections while controlling procurement costs, JACKWIN multi-message sign is your ideal choice.
Multi Message Sign by Speed
JACKWIN multi-message signs are suitable for use in all Australian states. In Queensland, a 25mm black border is added to all four sides. We categorize message signs by numerical value and distance into: ahead/end/speed limit signs, 40/50/60/70/80/90/100/110 km signs. Browse the product list below to find your favorite multi message signs.
Multi Message Sign by Text
JACKWIN offers multi-message signs with various display capabilities, including the following types. If these meet your project requirements, click the button to contact us.
Prevent pedestrians from entering hazardous or restricted areas, and avoid conflicts caused by detours or mixed traffic flow.
Provide drivers with the precise distance of road conditions ahead to help vehicles determine whether to take an alternate route.
Caution pedestrians to watch their step to avoid slips, trips, and falls that may result in injuries.
Used to prevent vehicles from entering closed hazardous sections and redirect traffic around them, emergency evacuation or accident control.
Used for temporary pedestrian traffic control and guidance.
To clearly indicate to drivers that the construction zone has ended.
Used to restrict non-essential vehicles and reduce traffic congestion.
Used to alert vehicles to slow down on newly paved roads for traffic safety.
Used to remind vehicles to center themselves relative to the shoulder and road edge.
To alert drivers to uneven road surfaces that may have elevation changes and cracks.
Inform the driver that there is an obstacle ahead; proceed with caution by reflective signs.
Place at locations prone to water accumulation, spaced 300-800 meters apart.
Placed 1-2 miles or 150-300 meters before the bridge as the initial and final warning.
Alert drivers, the roadway ahead is temporarily closed; follow a designated alternate route.
Used to alert drivers to turn on headlights and reduce speed when driving in dusty conditions.
Alert small vehicles to heavy vehicles ahead, direct drivers to merge and slow down.
To alert drivers to road marking construction ahead and caution against skidding and sudden braking.
Primarily used in construction sites or accident scenes, and during severe weather conditions.
Primarily used in conjunction with other traffic restriction signs, prevent interference with emergency operations.
Used to alert drivers to the presence of pavers, rollers, graders, milling machines, and chip sealers ahead.
Used for advance warning to inform drivers to allow time for deceleration and prepare for safe stopping.
Alert to dynamic hazards, warning of a traffic accident that has just occurred ahead.
Temporary signage for use during incident response and cleanup operations, preventing Traffic Accidents.
Used to warn pedestrians and vehicles of excavation or trenching operations ahead on the roadway.
Used to alert drivers that bridge maintenance inspections and repair work are currently underway ahead.
Used to inform drivers that the traffic signal ahead is out of service or undergoing maintenance.
Used to alert drivers to the presence of survey personnel ahead, preventing vehicle collisions.
Allow a 15-minute grace period to enable drivers to choose detours promptly.
Multi Message Sign by Size
In addition to 600 x 600 mm signs, JACKWIN also offers multi-message safety signs in 1200 x 300 mm and 900 x 300 mm sizes. If you require signs from the categories below, please email us.
Size 1200 x 300 mm, prevent public exposure to chemicals and reduce compensation claims.
Warn drivers and pedestrians to be mindful of unprotected trenches on the ground to avoid falling into pits.
Primarily used in post-earthquake areas, during the rainy season, and in regions prone to frequent mudslides.
Prevent vehicles from driving off the road due to missing curbs and prevent pedestrians from tripping.
To prevent vehicles from colliding with falling rocks on the road surface and chain-reaction rear-end collisions.
Reminder of road closure reasons, nature of emergencies, and prevention of secondary accidents.
Mark damaged safety barriers to prevent drivers from misjudging and colliding with them.
Prevent cyclists from slipping on the road surface and motor vehicles from entering the bicycle lane.
Proactively alert motorists and cyclists to road hazards, resolving right-of-way conflicts at intersections.
Using 3M reflective film, alert drivers to react immediately, distinguishing between real-time and potential risks.
Used to provide real-time explanations of lane functions and steering restrictions in response to temporary changes.
Used to notify of temporary signal timing adjustments and signal changeover conflict risks for vehicles.
To protect the safety of emergency construction personnel during operations and prohibit overtaking.
Size 900 x 300 mm, prevents vehicles over wet paint markings and alerts cyclists and pedestrians to wet paint.
Avoid slipping on temporary steel plates laid on the road; please slow down and proceed with caution.
Installed at the boundary of the blasting hazard zone to inform road users that there is no other risk.
Used for clearing roads during temporary events to prevent conflicts between pedestrians and vehicles, and maintain traffic order.
Inform drivers of reduced visibility to less than 150 m to prevent vehicles from entering blind spots.
Multi Message Sign by Symbol
JACKWIN offers multi-message signs featuring various graphics, including arrows, vehicles, and people. If you’re interested in any of these categories, contact us immediately.
Combined with text signage to create multi-layered information delivery, inform drivers of prohibited left turns.
Temporary traffic control signal prohibiting drivers from turning right, used for main transportation corridors.
replaced with other signage for variable lanes or construction projects, lane restrictions during specific time periods.
Temporary signage for traffic diversion during emergencies, in compliance with WA AS:1743 Road Signs standards.
Prompt pedestrians and e-scooter riders to use multi-modal shared bike lanes to reduce conflicts.
To alert pedestrians to the risk of tripping or falling on or near the sidewalk.
Real-time environmental alerts for indoor spaces, subway stations, amusement parkand urban parks.
Temporary signage for bicycle races, in conjunction with traffic diversion plans, prevents matches from being interrupted.
Dynamic traffic alert, designed to warn of dense pedestrian activity ahead in variable environments.
Suitable for sections without shoulders or dedicated running paths to prevent vehicles from colliding with runners.
For rockfall warning in mountainous road sections, positioned 30-1000 meters before the hazard zone.
Designed to alert drivers to slippery road conditions caused by rain, fog, wet asphalt, fallen leaves, other factors.
Applicable for road maintenance, utility line operations, parades, road construction etc.
Remind drivers not to use zipper-style alternating traffic, reduce sudden lane changes and emergencies.
Suitable for morning rush hour commutes, construction zone traffic guidance, and accident congestion management.
Primarily indicates lane status rather than directing right turns, thereby preventing serious traffic accidents.
Advising drivers not to follow the left-turn signal and to plan alternative routes in advance.
Applicable to rush hours or construction machinery occupying right-turn lanes.
Primarily used for closing multiple lanes, helping drivers merge lanes 1-2 km in advance and reducing collisions.
Used for temporary lane closure termination and merge zones, ramp merging, and variable lane restoration
Used for left-lane shifts on multi-lane roads caused by temporary obstacles, road narrowing.
For nighttime bridge maintenance, guiding traffic to bypass the disabled truck on the left and the tunnel accident.
Used for temporary left-hand deviation after entering hard shoulders, central median opening, or auxiliary lane.
Road narrowing for the right-hand lane facilitates the opening of emergency lanes and accident clearance.
Inform the driver that roadwork ahead has concluded and traffic has resumed to avoid unnecessary lane changes.
To alert drivers that a three-way intersection lies ahead, where the main road turns left.
To anticipate the intersection layout and slow down in advance to prepare for yielding.
To alert drivers to sudden mobile roadblocks ahead or lane congestion.
Provide real-time contextual instructions to reduce red-light running, rear-end collisions, and driving confusion.
Typically used to reduce driver confusion and the likelihood of running red lights.
Specifically designed for truck use, to be used in conjunction with other signs to enhance compliance rates.
dynamic warning, applicable to road construction personnel and utility maintenance crews in conjunction.
An essential component of the construction safety system, suitable for mobile operations and nighttime construction.
Used during routine vegetation maintenance by highway maintenance and landscaping departments.
Remind vehicles to follow initial traffic signals, provide advance warnings, and reduce sudden braking chaos.
Primarily designed to alert drivers to cyclists while dynamically adjusting to different construction zones.
Alert drivers to potential hazards ahead, such as steep downhill slopes with right turns that may cause rollovers.
Prevent overturning caused by the vehicle leaning to the left when climbing steep slopes, prevent brake failure.
Alert drivers to pedestrians on the right side, on crosswalks without traffic signals.
Inform drivers that they are approaching a roundabout and should slow down and yield.
Alert drivers to speed bumps ahead, used on residential streets, schools, hospitals, industries, and highways.
Remind drivers that traffic congestion ahead may cause delays and that they should maintain a safe following distance.
To prevent wrong-way driving and reduce confusion when navigating multi-lane sections of complex overpasses.
Multi Message Sign Legs by Type
JACKWIN offers four leg options under different frame designs for your selection, based on varying coating colors and structures. If you’re interested in our legs, send an email for a quote immediately.
Made from 1mm galvanized powder-coated steel, adapt to uneven surfaces.
Stable triangular structure ensures even weight distribution and prevents tipping.
Used for urban roads and industrial zones, feature high rigidity to reduce swaying risk.
Convenient storage, space-saving, can be quickly recovered during construction.
Multi Message Sign Frame 1200 x 900mm
JACKWIN Multi-Message Sign Frame, constructed with 25×25 mm galvanized square tubing, 1mm thick, featuring a powder-coated finish.
- We employ designs featuring fixed or folding brackets to create a stable structure capable of adapting to any road environment, ensuring the visibility and durability of signage.
- Our sign frame utilizes galvanized processes with pure steel or alloy materials, offering rust resistance and UV protection.
- Whether facing strong winds, heavy rain, blizzards, or other severe cold weather, our frame can withstand a weight of 3kg. The dual-leg structure ensures the sign frames are resistant to tipping over or damage.
If you require frames paired with signs as the primary support structure, please contact us for a quote.
Western Australia Multi Message Signs
JACKWIN multi-message signs are suitable for Western Australia, fully compliant with DPTI regulations and MRWA standards.
- Our signs are specifically designed for traffic road construction signage, controlling vehicle speeds, and alerting drivers to road conditions ahead.
- Our signs utilize 6mm corflute and 1.6mm aluminum plate, with 3M reflective sheets to reflect vehicle headlights.
- The colors of road construction signs strictly adhere to the black and orange specified in MMS-ADV-47, while white, black, and green are also mainstream colors for regulatory or guide signs.
- Our self-produced multi-message signs are popular across all Australian states, with partnerships established with dozens of retailers and long-term supply contracts with government agencies.
If you’re seeking a signage supplier that fully complies with Australian regulations, contact us immediately for a quote.
Construction Site Multi Message Sign
JACKWIN multi-message signs specifically for construction site safety emphasize visitor control, requiring all personnel entering the site to wear construction safety clothing, safety shoes, and hard hats. Safety regulations for construction site personnel are also stipulated, requiring all personnel to undergo training and provide 24-hour contact information via the designated website.
Our signs are designed for outdoor use, effectively displaying diverse warning information for construction zones with high visibility. For visitors and internal personnel, construction site multi-message signs can help you reduce the risk of personal injury and liability claims.
For diverse construction scenarios and the need to display varied information, we offer corresponding customization services.
Resources
Know more products specification? Just View and Download JACKWIN catalogue by clicking link.
Know more about JACKWIN products and company? Just click video link, you can get more than you think.
To learn more about JACKWIN products, please follow our knowledge center.
Applications
JACKWIN multi-message signs are primarily designed on highways, urban arterial roads, work zones, and industrial sites. Contact us immediately to select the most suitable signs for you.
Our signs are used in highway construction zones to provide advance warnings, clear guidance, enforce speed limits, and prevent unauthorized entry.
Compared to highways, JACKWIN multi-message signs handle higher information complexity in mixed-traffic urban arterial roads, adapting to flexible and complex environments.
Our signs are suitable for urban and rural public construction zones, such as road maintenance and utility operations, ensuring the safety of construction personnel, pedestrians, and vehicles.
Our signs primarily serve functions such as ensuring safe production, guiding personnel, managing equipment, and facilitating emergency response at industrial sites.
More About Our Multi-Message Signs
JACKWIN produces and customizes various signs for Australia, the UK, New Zealand, and the US, including metal signs and plastic signs. Our signs are vibrant, durable, and reflective. If the details below regarding the multi-message sign are helpful to you, please email us now or contact us directly.
- Video
- Gallery
Watch the video below and learn more details about JACKWIN. If you want to customize your specific signs, please send us an inquiry.
Testimonials
-
I’ve ordered a lot of signs for my worksites, and now my worksites will be much safer.
JohnWorksite Supervisor -
Nice multi message sign! They are highly visible when I shoot a beam of light on them.
DavidDistributor -
Highly recommended! You can custom sign with any text and logo on it! Nice service.
DanielPersonnel
JACKWIN multi-message sign is a type of sign primarily used in the Australian region. It allows multiple signs to be combined within a single frame to save space while displaying diverse information.
JACKWIN multi-message signs primarily feature corrosion-resistant metal base plates or stainless steel aluminum plates, equipped with 3M Class 1 reflectors. When vehicle headlights shine upon it, the reflective film reflects light back toward the vehicle, guiding drivers in low-light conditions and helping prevent traffic accidents.
The base plate of the JACKWIN multi-message sign is primarily constructed from aluminum or stainless steel with PP plastic, covered with a layer of 3M reflective film.
Yes, JACKWIN multi-message signs are corrosion-resistant, waterproof, and dustproof.
Our multi-message signs are suitable for various settings and can be freely combined and customized. We can provide tailored recommendations based on your specific application. Please feel free to contact us if you have any requirements.
- The operating principles differ. Multi message signs primarily manage traffic by displaying varied information that reflects vehicle headlights. Variable message signs (VMS) use electronic displays to edit content and convey information through light projection.
- Differing Levels of Convenience. Multi message signs are lighter in weight and can be manually replaced. VMS units are heavier, but information can be generated directly without manual replacement.
- Aluminum Plate Cutting: We use a laser cutting machine to cut the aluminum plate into the required shape and size, and then grind off the rough edges.
- Reflective Film Printing: Use digital printing or screen printing to create reflective film with vibrant text, colors, and patterns.
- Reflective Film Lamination: We adhere the adhesive reflective film to the aluminum plate, avoiding air bubbles and scratches during the process.
JACKWIN factory supports sea freight, air freight, and land freight, while also accommodating FOB, DDP, CIF, and EXW terms.
Shipment will be made within 7-15 days after receiving the deposit.
3 years. Products damaged due to quality issues within the warranty period may be replaced.
The JACKWIN website showcases the most comprehensive range of multi-message signs. You can request a quote via email or by contacting us directly.
