Flood Lights for Sale
JACKWIN manufactures and supplies a full range of flood lights, including LED flood lights, HIP flood lights, MH flood lights, xenon flood lights, and halogen flood lights. We also manufacture solar-powered floodlights, rechargeable floodlights, and AC floodlights, depending on the power source.
Our flood lights use Lumileds, Cree, Nichia, and Osram chips and can be customized with Mean Well, Inventronics, or Sosen driver systems to meet IK08, IK09, and IK10 impact resistance ratings. We also support DALI, 0–10V dimming, light sensing, or motion sensing.
We support private labeling and provide samples, and we can provide contractors with drawings and other details. Please contact us.
How do JACKWIN flood lights work?
JACKWIN floodlights are lighting fixtures that use LED light sources and drivers to emit light, featuring wide-beam lenses and heat sinks for heat dissipation. Our lights are primarily used for outdoor security, stadium lighting, building facade lighting, and parking lot lighting.
Flood Lights by Light Source
JACKWIN offers a variety of light sources to meet different needs. Whether you’re looking for energy-efficient, low-cost floodlights or ones that prioritize safety and exceptional quality, we can tailor a solution just for you.
Made of housing, LED sources, lens, mounting bracket, with low energy consumption, CCT of 2700/3000/4000/5000/5700/6500K, and power ratings ranging from 30 to 1200W.
Uses HPS/MH/MV lights, electrical: 230/240 V, 50 Hz, operates by passing current through an arc tube filled with an inert gas, with a service life of up to 20,000 hours and infrequent replacement.
Composed of a mogul base with a horizontal socket position, a multi-tap pulse-start ballast, and light bulbs containing a mixture of mercury and metal salts, operates on standard 120–277 V line voltage.
Features a cast-aluminum housing, a quartz halogen lamp, a high-temperature silicone gasket, pivot and top-mount installation options, and a heat- and impact-resistant tempered-glass lens.
Features a die-cast aluminum lampshade and an anodized aluminum reflector, includes a fixed lamp door, emits a soft yellow light, used in humid areas.
Provides bright, natural white light, has an IP44 protection rating, uses a die-cast aluminum housing and a tempered glass front panel, and is equipped with a passive infrared sensor for anti-theft functionality.
Flood Lights by Power Supply Method
Using various power supply methods, JACKWIN adapts its floodlights to different application scenarios, including fixed locations connected to the mains, construction sites, and special locations with extremely high safety requirements. If you are interested in any of the floodlights listed below, please contact us immediately.
Including lithium iron phosphate, lithium-ion, gel batteries, and AGM batteries, power output ranging from 10W to over 500W, no wiring required, no mains power required, 130–200 lm/W of LED Efficiency.
Widest range of applications, with a rated power of 10W–2000W, a power factor greater than 0.9, 4kV–20kV, 10–95% RH humidity, and 0–10V dimmable, requiring professional wiring during installation.
Powered by 4 D-cell batteries and equipped with built-in sensors, requires no professional electrician and is suitable for use in emergencies, used promptly after a power outage.
Charge it in your car using the main power adapter or a car cigarette lighter adapter; a full charge takes 6 hours and provides 10 hours of runtime, with 6,500 lm of luminous flux.
Flood Lights by Application
JACKWIN flood lights—especially LED flood lights—are characterized by high brightness, low energy consumption, and a long service life. Our lights are suitable for a variety of applications.
Features an integrated die-cast aluminum housing and a composite cooling system, along with a nano-scale polarizing coating, enabling operation in extreme environments.
Suitable for clay and concrete courts, complies with regulations set by tennis federations; features intelligent light intensity adjustment, with 5,000K lumens, GR < 50.
With a lifespan of 50,000 hours and a luminaire efficacy of up to 170 lm/W, features a symmetrical or asymmetrical configuration and a latch design for easy maintenance.
Installed at heights ranging from 20 to 40 feet, available in 25° lateral spread, 40° spread, and 360° illumination beam angles, with 29,000–45,000 lumens, and require no warm-up time when turned on.
Used to prevent workplace accidents, damage to warehouse shelving, forklift collisions, measurement errors, IK 10 impact resistance rating, uses motion sensors, zone-based sensor control.
12,000–65,000 lumens, compliant with UL, CSA, and NOM standards, 160/165 lm/W of luminaire efficacy, over 50% more energy-efficient than traditional floodlights, rated for over 100,000 hours.
Features 192 LED beads with 16,203 lumens, a powder-coated aluminum housing, and a stainless steel bracket for enhanced installation stability, offering 60° and 120° beam angles.
Using 5050 chips, 400W-600W, 160-190 lm/W of luminaire efficacy,72000-96000 lumens, 565 × 382 × 155mm in size, 3000K/4000K/5000K/5700K/6000K CCT.
With 200,000 lumens and 160 lm/W of luminaire efficacy, having passed a 4,000-hour salt spray test, and featuring 10 kV/20 kV surge protection, composed of die-cast aluminum or PC casing for waterproofing or shock resistance.
Featuring a portable design, suitable for construction sites, workshops, and outdoor settings, with 2000–5000 lumens, 6500K CCT daylight, 230V/12V/24V, rotating 360° horizontally and tilting 360° vertically.
Features an asymmetric wide beam to reduce light pollution for drivers, suitable for static and digital billboards, as well as storefront signs, with options for top- or bottom-mounted installation.
Designed for tunnels, underground passages, enclosed or semi-enclosed spaces, eliminates blind spots and controls glare, requires no warm-up time, and adjusts across the entrance, transition, interior, and exit sections.
Featuring a bright deterrent light and high visibility, equipped with a passive infrared motion sensor and a security camera, expands the coverage area, saves energy, and is installed at a height of 8–10 feet.
Creates a warm, inviting nighttime atmosphere with an adjustable beam angle, effectively illuminating driveways, walkways, and yards while eliminating blind spots.
Featuring an explosion-proof and isolated design, the unit incorporates stainless steel brackets and rubber shock-absorbing mounts to enhance vibration resistance.
Features a rugged cast aluminum housing, anti-loosening mounting brackets and shock-absorbing pads, an asymmetrical lens and anti-glare hood, and an IP67 protection rating.
Flood Lights by Type
JACKWIN floodlight uses motion detection to provide timely illumination based on movement patterns, playing an important role in home security. In addition, it supports wireless remote control and does not require a connection to the mains power supply, thereby enhancing portability and installation efficiency.
Foldable, with stability ensured by a tripod and adjustment bolts; height adjustable from 27.95” to 70.47”, features a 140° beam angle, 360° horizontal rotation, and 270° vertical rotation of the lamp head.
With 2000 lumens of brightness, no wiring or batteries required, equipped with a motion sensor and a remote control, IP44 rating, using a solar panel to absorb and store energy, detects objects within a 25-foot range.
Control on/off via the Wi-Fi app, use four lamp sockets, 300° beam angle; 6,500 lumens, color temperature adjustable from 2,700K to 6,500K, features automatic scheduling and voice control.
With 3,200 lumens at 27W, it uses a PRI motion sensor to detect objects within 72 feet, with 270° wide-angle illumination, and allows for flexible adjustment of the detection range and illumination duration.
With 8,700 lumens at 60W, 500K CCT, CRI greater than 80, featuring an ADC12 aluminum heat sink housing and a borosilicate glass lens, with a voltage rating of 100–277, IP65 rating for wet locations.
Flood Lights by Watts
JACKWIN manufactures flood lights in a full range of wattages, utilizing a comprehensive production process and complying with industry standards in the EU, North America, Asia, and Africa. Please email us immediately.
130 LM/W luminous efficacy, features a 15°–270° adjustable bracket with a gear mechanism, suitable for garden contour lighting, small-scale facade washing.
Rated for 50,000 hours of use, dimensions: 5.35L x 4.33W x 1.5D, input voltage: 120–277 V, weight: 0.9 lbs, primarily used for accent lighting in residential or commercial buildings.
Suitable for small industrial lighting areas of 4–5 m², with a luminous efficacy of 120–140 lm/W, featuring an aluminum alloy housing and a tempered glass lens, surge resistance: 2 kV.
Saves 80% on electricity, features a highly transparent and UV-resistant PC lens, an aluminum alloy housing, and 4mm tempered glass, with a startup time of less than 0.5 seconds.
Increases brightness and features a maximum beam angle of 120° with 56 LEDs, designed for industrial auxiliary lighting, mounted on beams or workbenches, and provides 4,000 lm of daylight-white light.
Adjustable color temperature, including warm white (3000K), cool white (4000K), or daylight (5000K), 7050 lm, compatible with all electrical systems, 0–10 V dimmable, adjusting any angle flexibly.
UL and DLC certified, color temperature 3000K–6500K, input voltage 120–277 V AC, and input frequency 50/60 Hz, suitable for outdoor basketball courts, school playgrounds, community recreational plazas.
175 lm/W luminous efficacy, integrated photoresistor for 24/7 lighting control, IP66 waterproof rating and IK07 impact resistance rating, ≥80 color temperature accuracy, color temperature: 3000K, 400K, 5000K.
Featuring a bronze powder-coated aluminum housing, 130 lm/W luminous efficacy, 9100 lumens at 5000K CCT, certified by UL, IP65 waterproof rating, and 80° x 110° beam angle.
140 lm/W luminous efficacy, with 10,500 lumens, suitable for heavy industry, commercial buildings, parking lots, and areas of 60–70 m², IP66 waterproof rating, 10 kV surge protection.
Features durable LUMILEDS chips and an ADC12 aluminum heat sink, high-lumen clear lens, IP65 waterproof rating, 129 lm/W luminous efficacy, passed the LM79 test, and 50000 hours of rated life.
125 lm/W luminous efficacy, 100000 lifetime hours, DLC advanced certification, medium beam, 4000K CCT, available in multiple optical distributions, ≥80 CRI.
Primarily used in large parking lots and large factories, suitable for medium- to large-scale engineering lighting and can withstand operating temperatures ranging from -20°C to 45°C.
Features a cool white CCT of 6500–7000K, an operating voltage of 200–240V AC, an IP66 rating, 100-120 lm/W output lumens, and ultra-wide-angle blended, uniform light distribution.
With 18,000 lumens, equipped with a U-shaped bracket and a 5-foot power cord, can be installed in 5 minutes, offers 180-degree flexible adjustment, and automatically switches light sources.
Selectable beam angles: 40°×100°, or 10°, 15°, 30°, or 45°, 28000 lumens, 140 lm/W output lumens, with 176000 hours of rated life and a 1.36 EPA rating, by sliding or trunnion mounting.
3000/4000/5000K CCT, with 38500 lumens of brightness, 154 lm/W of luminous efficacy, 10kV line-to-line or 10kV line-to-earth of surge protection, 0-10V dimming.
With 45000 lumens, 150 lm/W luminous efficacy, ≥0.9 power factor, features Lumileds LEDs, Die-cast aluminum housing, and 0-10V dimming standard.
Features a silicone gasket for waterproof sealing, consists of an acrylic lens and a cast aluminum housing with a cross-sectional profile, NEMA 7×6 optics.
Covers an area of 300 square meters, delivering 64,000 lumens and 160 lm/W of luminous efficacy, and features a modular heat dissipation design.
With a 150 x 85° beam angle and 5700K CCT, 60750 lumens, installed in open areas and high-illumination projects, features premium LED chips and a 20 kV surge protector.
Uses a high-lumen-output Philips LUXEON, featuring a finned heat sink, 130 lm/W of luminous efficacy, and an 85 × 135° lens, CRI≥75, white 4000K-7000K CCT.
75% more energy-efficient than traditional light bulbs, 8,000 lumens, a longer effective range, and capable of being installed at heights of up to 30 feet.
With 84,000 lumens, suitable for industrial areas and municipal projects, salt-fog corrosion resistance, and resistance to strong wind vibrations.
84500 lumens and 130 lm/W of luminous efficacy, 45° beam angle, installed on the ceiling, 5000K CCT, with wide voltage compatibility, corded electric power source.
Projection distance of at least 35 meters, 10-90° beam angle, 140 lm/W of luminous efficacy, >0.95 power factor, 80+ CRI, 2700K-7000K CCT, using MEANWELL driver.
With 112500 lm LED rating, IK08 impact resistance, equipped with a 1,000 mm cable, features symmetrical or asymmetrical optical designs, CRI > 70.
Uses 1260 SMD LED chips, flicker-free lighting, 0.95 power factor, available in 3000K, 4000K, and 6500K CCT, non-dimmable, input frequency 50/60 Hz.
Designed for outdoor sports fields and airports, with 127,500 lm, an IP66 waterproof rating, and U-bracket mounting, offers 150 lm/W of luminous efficacy and reduces energy consumption by 65%.
Mercury-free, no flickering or noise upon startup, soft and even light, uses 3030 high CRI chips, available in 500K and 5700K CCT, 117,000 lm and 130 ml/W of luminous efficacy.
Offers a color temperature of 5000 K, available with a 60° symmetrical or 150/80° asymmetrical lens, 142,286 lm, IK08 impact rating, and dimensions of 637 × 1120 × 134 mm.
Uses Philips 3030 or Osram 15D chips, a Meanwell driver, PF > 0.95, features full-angle adjustment, and has a startup time of less than 0.5 seconds, intelligently reduces output during unoccupied periods.
280000 lumens and 140 lm/W of luminous efficacy, provides an OEM driver rated for 50,000 hours of operation, equipped with a 10 kVA surge protector, 6500K cool white CCT.
Features 3030 SMD chips and a Meanwell or Inventronics driver, 350000 lumens, 140 lm/W of luminous efficacy, and 17-level wind power, with 10/25/60° beam angle, 300K-6500K CCT.
170 lm/W of luminous efficacy, 510000 lm, using SMD 5050 chips and 10 LED modules, 2700K-6500K CCT, 877 × 1552 × 372mm in size, meets the needs of large-scale on-location shoots.
Flicker-free lighting, UL-certified driver, supports 0-10V dimming, saves 75% power compared to replacement, IK10 rating, 3000-6500K CCT, 150 lm/W luminous efficacy, 600,000 lumens.
With 242 super bright LED beads and a solar panel, an IP67 waterproof rating front cover, 6500K CCT, features the latest curved design, is eco-friendly and durable, and includes expansion screws for installation.
Flood Lights by Light Color
JACKWIN flood lights can emit light in colors such as red, blue, green, orange, purple, rainbow, warm white, cool white, and natural light, and they also feature dimming capabilities. You can flexibly control them using a switch, remote control, or app.
3,800 lm of warm light, creates a comfortable atmosphere and enhances the outdoor living experience with a CCT of 2,700K–3,000K, suitable for residential garden landscapes.
High penetration, which helps attract fish; the light remains above the water surface to prevent barnacle buildup, corrosion, and frequent maintenance, powered by mains electricity or batteries.
Using a Meanwell or Sosen driver, smart dimming control enables smooth brightness adjustment and a narrow beam, with a heavy-duty stirrup mounting bracket and protractor scale for easier aiming.
Prevents severe light pollution, is ideal for stage performances and creating ambiance, reduces interference from background lighting, light wavelength: 385-400nm.
Simulates the effect of natural sunlight or candlelight, offers high visibility in harsh outdoor environments, suitable for ambient lighting, 1800K-3000K CCT.
RGB flood lights with red, green, and blue chips, RGBW and RGBCCT flood lights, primarily used for exterior wall lighting, featuring 3030 RGB SMD LEDs.
With 500 lumens, measuring 3.4“ x 1.9” x 0.09″, an IP68 waterproof and dust-resistant rating, and a minimum power consumption of 0.5A at maximum power.
Featuring a slim, black design, ideal for roadwork in low-light conditions, minimizing glare and light pollution, suitable for undercover operations or outdoor work.
Supports timer settings and daily energy-saving cycles, with 100W power, 10,000 lumens, 5,000K daylight white color, eliminates blind spots and enhances clarity, suitable for high-intensity work.
Flexibly adjust color temperature, supporting 0-10V, PWM, DALI, or wireless dimming protocols; adjust brightness from 0% to 100%; reduce power consumption and chip operating temperature.
Flood Lights by Installation Method
JACKWIN floodlights are categorized by the following installation methods. Please send us a request for a quote.
Installed using 1/2-inch conduit or a standard J-box, for illuminating building facades, entrances, or perimeter walls, requiring no additional support poles.
Connected using a spherical hinge mechanism, provides precise, multi-dimensional beam control and features a secure connection.
By adapting and installing mounting arms to fit existing round or square columns, typically used on tall poles ranging from 2 to 15 meters in height.
Use a cast aluminum mast adapter to secure the light fixture to a standard horizontal steel boom, or mount it on top of a pole, which fits a 60mm inner diameter sleeve.
Can be mounted on a pole, wall, ceiling, or floor, features a U-shaped bracket design that allows for unlimited angle adjustment, bolted and bracket-connected, supports tilt adjustment.
Installed using a pole and cross-arm or mounted on a wall or flat surface, providing exceptional resistance to wind loads and vibrations.
Flood Lights by Beam
JACKWIN floodlights offer angle beams ranging from narrow to wide, capable of covering up to 360° in all directions.
With a beam angle of less than 30°, project onto targets 100 meters away and are used for landscape lighting, architectural facade lighting, high-mast lighting, and security applications.
Featuring a beam angle between 30° and 60°, to balance energy efficiency and practicality, installed at a height of 4–10 meters and equipped with an anti-glare shield or honeycomb grille.
With a beam angle between 90° and 120°, providing soft, diffused lighting, suitable for installation heights of 3–5 meters, applied for low poles or wall mounting, covers a wide area.
By rotating the rotatable optic, sliding the zoom ring, or adjusting the knob, beam from 10° to 110°, reducing the need for a wide variety of inventory and extending battery life by 20%.
Features
JACKWIN flood lights feature surge protection to extend the life of the battery and chips while maintaining their brightness. Our lights have a lifespan of up to 5,000 hours and support dimming with multiple color temperatures. Here are their features:
Our pedestrian crossing lights use a pole system for easy installation; no professional worker is needed to fix it, with low labor and low maintenance costs.
Compared to traditional lighting fixtures, our floodlights can save 75% in energy consumption, whether powered by the utility grid or solar panels.
Our floodlights feature die-cast housings and high-strength glass lenses, with an additional waterproof layer inside to prevent water leakage.
All our flood lights come with a 3-year warranty from the date you receive the goods. Should any faults arise during use, we provide free technical support.
Your Unique Lighting Solutions
JACKWIN provides high-quality lighting solutions for warehouses, parking lots, construction sites, homes, and shopping malls. Our lights feature a high color rendering index and are flicker-free, helping to improve nighttime construction efficiency and providing a lighting environment with no blind spots for surveillance cameras. Please contact us immediately!
High Color Rendering
JACKWIN LED floodlight series features a CRI greater than 80 and is designed to enhance the effectiveness of security surveillance, the accuracy of professional sports broadcasts, and boost commercial appeal and precision in industrial operations.
Advanced Imported Chips
Our floodlights use CREE, Osram, and Bridgelux LED chips in the 3030 size. As a result, our floodlights significantly improve the color rendering index, accurately reproducing the true colors of illuminated objects.
Multi-Color Array Light Mixing System
Our floodlights utilize a TIR (Total Internal Reflection) structure combined with a microprism-array lens design. By precisely redirecting and evenly distributing light, they reduce light loss during transmission and ensure the effective output of light with high color rendering.
Thermal Management and Drive Control
Our lighting products utilize biomimetic honeycomb fins, high-thermal-conductivity aluminum substrates, or phase-change vapor chambers to maintain the LED junction temperature below 65°C. This can fundamentally suppress the thermal decay of the light effect and color drift. Additionally, the constant-current driver ensures a stable luminous flux output and maintains consistent color temperature and color rendering performance during dimming.
Advanced Light Control
Soft Start
Our driver limits the current rise by connecting an external capacitor. This not only protects the electronic components inside the light fixture but also creates a smooth, gradual lighting effect.
Fade-On
You can use a smart switch or a microcontroller-based system to send commands that make the lights brighten or dim within a few seconds.
Dimmable
We have built a module into the driver that receives dimming signals, and a dimming switch must also be installed on the wall. As long as the dimming switch sends a command to the driver, you can precisely control the actual brightness of the LEDs.
Excellent Light Distribution Design
JACKWIN floodlights use reflectors, distribution lenses, diffusing elements, and optical chambers to provide uniform illumination, reduce light spill, and improve light utilization. We offer beam angles ranging from 10° to 120° to ensure that light covers a wide area.
- Precision Optical Lens Design: Through the design of aspheric optical surfaces, TIR and asymmetric lenses, and microprism structures, our lights achieve highly efficient light utilization.
- Multiple Beam Angle Options: Our lights provide precise coverage ranging from narrow to wide beams, balancing illumination distance, coverage area, and light intensity.
- Uniform Light Distribution: Achieve diffused and even lighting, with no noticeable spots or shadows.
- Low Glare Design: We use an anti-glare honeycomb grille design, optical glass lenses, and a smart control sensor system to reduce light pollution, customer complaints, and remediation costs.
- High Optical Efficiency: We use tempered glass or PC lenses with 98% light transmittance. The interior of the luminaire features vacuum-deposited aluminum, combined with precision geometric reflectors, to increase optical efficiency to over 95%.
- Accurate Beam Control: Equipped with an adjustment bracket featuring a precision scale, our lights can prevent blind spots or glare caused by light shifts over time.
- Minimized Light Spill: Using a full-shading design, optical lenses, and light-blocking accessories, along with motion sensors and timers, our lights can achieve mechanically controlled lighting.
For more details, please email us for quotes!
Integrated Flood Lights vs Replaceable Bulb Fixtures
JACKWIN integrated flood lights incorporate LED chips, power drivers, and heat sinks as an indivisible unit within the lamp housing.
- The superior integrated design gives our lights better heat dissipation and optimized light distribution.
- The integrated design ensures complete waterproofing, dustproofing, and weather resistance.
JACKWIN replaceable floodlights are easy to maintain, and their bulbs can be easily swapped out to adjust brightness, color temperature, and beam angle. From a cost perspective, they are a cost-effective choice.
However, the lifespan of a standalone bulb is only 15,000 to 25,000 hours. Designing the bulb and the fixture separately may result in suboptimal heat dissipation and light output.
If you’re looking for performance and a slim, lightweight design, you can choose an integrated floodlight.
If you want more flexibility in adjusting lighting characteristics and want to save on initial costs, you can choose a fixture with replaceable bulbs.
Resources
To know more product details, please click to download JACKWIN catalogue as follow.
You can visit our video gallery to learn more about our products and JACKWIN company.
To learn more about JACKWIN products knowledge, please follow our knowledge center.
LED Flood Lights vs Halogen Flood Lights
JACKWIN LED flood lights consume 25 times less energy than halogen flood lights and generate less heat, which helps extend their service life. It offers higher luminous efficiency and greater brightness, while also saving energy and reducing carbon emissions and waste. Furthermore, from a long-term cost perspective, the reduced need for frequent replacements can offset the initial costs.
JACKWIN halogen floodlights have a CRI of over 95, offering unique advantages in color rendering and accurate color perception. They turn on instantly and reach maximum brightness immediately. Compared to LED flood lights, these lights consume more energy, have an average lifespan of only 2,000–4,000 hours, and pose safety risks due to heat generation and fragility.
Case Studies of Partner Companies
JACKWIN has established partnerships with distributors, contractors, and manufacturers in more than 40 countries worldwide for flood lights. We operate a 4,000-square-meter factory equipped with a complete production line, including die-casting machines, CNC drilling machines, stamping presses, high-speed SMT machines, reflow soldering machines, automatic dispensing machines, and an automatic spray coating production line. Below are some examples of our partner companies.
In October 2025, our customer from New Zealand found our website through a Google search and contacted our sales representative. After discussing the details of the proposal, they placed an order for 3,000 units of 300W floodlights equipped with sensors and capable of remote control. They also requested that we provide factory certificates and luminance test reports with the shipment. Following a site visit, we finally signed the purchase contract in November.
After receiving an order, our factory begins manufacturing the LED chips, preparing the driver power supplies, and machining the housings and heat sinks. We then proceed with the assembly process, which includes SMT placement and reflow soldering, phosphor coating, and the installation of optical components. We completed production within the promised 7 business days.We also use custom foam padding and reinforced cardboard boxes, along with palletizing and corner protectors.
Our contract specified FOB terms, which required us to ensure the floodlights are safely loaded onto the ship. After preparing and packaging the goods and affixing the shipping marks, the floodlights we manufactured were shipped from the warehouse to the Port of Ningbo to complete export customs clearance procedures. After shipment, we provided the customer with documents such as the commercial invoice and packing list.
We provided our customers with detailed installation guides and guidance from professionals. The customers followed the guides to complete the installation and wiring, and conducted centralized debugging and inspections during the project to ensure on-site safety and that the illumination angles met regulations, making the system suitable for daily security use. These floodlights passed the acceptance testing and helped the customer resolve their lighting issues.
More about Our Company
JACKWIN was founded in 2008. Through the dedicated collaboration of more than a dozen engineers, we have established an end-to-end production model for flood lights, along with supporting customization and shipping services. We provide a complete set of CAD drawings, installation videos or manuals, and relevant certificates. If you are interested in our flood lights, please contact us for a quote.
- Drawing
- Video
- Gallery
No, JACKWIN LED floodlights have very low operating costs and are a cost-effective lighting solution. Our lights provide higher brightness while saving 80% on energy consumption, and they have a longer service life of over 50,000 hours.
- JACKWIN RGBW floodlights are among the lighting options suitable for everyday use. Our flood lights use dedicated white LED chips to emit pure, practical white light. What’s more, our lights aren’t just for everyday life and work—they can also be switched to vibrant colors for parties and holidays.
- Standard RGB flood lights produce white light by setting the brightness of the red, blue, and green LEDs to their maximum levels. These lights consume too much energy, have a low CRI, and produce poor-quality light, making them unsuitable for everyday use.
JACKWIN motion-activated floodlights are designed to save energy, with extremely low standby power consumption and very short illumination times.
- When our lights are off and waiting for motion detection, their standby power consumption is 1–2 W.
- When triggered by a moving object, our lights typically remain on for only 1–5 minutes before automatically turning off. This reduces the amount of electricity consumed during full-power operation.
JACKWIN manufactures IP67-certified in-ground and underwater lights that can be submerged in water and are resistant to thermal shock.
Our lights are resistant to low-pressure water jets from any direction and are splash-proof. Once our lights are upgraded to IP67 or IP68, they can withstand continuous immersion and prevent the ingress of moisture from gravity or condensation.
Pre-installation Preparation: Choose a location 15–30 centimeters above the door frame. Ensure the installation site is close to an existing power source or junction box, and make sure there are no obstacles, such as large tree branches, within the designated area.
Install the mounting bracket: Drill holes in the wall at the marked locations, insert plastic expansion anchors, and then secure the bracket with screws.
Connecting the Wires
Installing the Light Fixture and Sealing: Use screws or locking rings to mount the floodlight housing to the bracket, and check that the rubber gasket is properly in place.
Adjusting the Angle and Testing: After restoring power, loosen the adjustment screw, point the light toward the area you want to illuminate, and then retighten the screw to lock it in place. Turn on the switch to check if the light comes on properly, test the sensor’s sensitivity, and adjust the sensing distance and the duration the light stays on.
JACKWIN floodlights are designed to project a wide beam of light over a large area. They are primarily used for general lighting, security surveillance, and illuminating large spaces.
JACKWIN spotlights are designed to project a narrow, concentrated beam of light onto specific objects or areas. They are primarily used for ambient lighting, highlighting details, and creating dramatic visual effects. View more about flood light vs spot light.
