Portable Speed Bumps for Sale
JACKWIN has designed various types of portable speed bumps in different sizes, made of PVC/PP/HDPE/rubber/TPU materials. Our speed bumps are used to reduce the risk of traffic accidents and facility maintenance costs. Our portable speed bumps are key to ensuring traffic safety.
- Quick deployment in 3 minutes.
- Suitable for traffic conditions at 40–50 mph.
- Customizable high-intensity reflective strips or LED lights can be installed in the pre-cut slots.
- Passed compression, impact, abrasion, and weather resistance tests.
- Fully compliant with MUTCD, OSHA, FHWA, BS EN 1436, BS EN 12899, and AS 1742 standards.
If you are interested in purchasing our portable speed bumps, please contact us immediately for a quote.
Portable Speed Bumps by Type
Extends to 10 feet in length and is fitted with high-visibility reflective strips on both ends, which do not fade or crack.
3000 x 250 x 30 mm in size, 13.5 kg in weight, with 3cm thickness, featuring interlocking modular design and ground-mounted installation.
Made of high-quality PVC and PP materials, 3000 x 230 x 40 mm in size, 13kg in weight, bearing capacity of 10 tons.
Made of high-visibility yellow HDPE, load limit 20000 lbs per pneumatic tire, 20 pounds in weight, 6 ft x 10 ft x 2 ft in size.
Bearing capacity of 22000 lbs, 118″ L x 9.8″ W x 1.7″ H in size, 28.6 lbs in weight, with HI reflective tape, made of TPU materials.
118” L x 10” W x 1” H in size, 26.4 lbs in weight, with HI reflective arrows, made of TPU materials, with quick deployment.
Equipped with yellow LED lights and reflective strips, with a load capacity of 17,000 pounds, made of PP material, measuring 20” L x 20” W x 10” H.
Made of PP surface and rubber padding, minimum load bearing 200 MPa, 15kg/roll, 3000 x 220 x 40 mm in size, handled by one person.
- Features and Function
- Multi-project Support.
- Reduce the incidence of accidents, workplace injuries, traffic-related compensation claims, and fines for violations by 80%.
- Reusable thousands of times, with a high production-to-waste ratio.
Temporary Speed Bumps Canada
JACKWIN temporary speed bumps are primarily used for winter snow removal and temporary traffic control in Canada.
Our temporary speed bumps keep vehicle speeds in the city center between 30 and 40 kilometers per hour; they are inexpensive to install and easy to adjust later.
Winter Maintenance
The most common application for our temporary speed bumps in Canada is winter maintenance. To address the problem of permanent speed bumps severely hindering snowplow operations, our bumps can be easily removed as needed.
Portable Speed Bumps vs Fixed Speed Bumps
Installation Method: JACKWIN fixed speed bumps must be installed through engineering construction and embedded in the ground; this requires installation by qualified professionals. Thanks to their modular design, JACKWIN portable speed bumps can be secured to the road surface without construction work.
Flexibility: Our portable speed bumps are highly mobile and can be rearranged or stored with minimal labor and resources. Once installed, our fixed speed bumps remain in place, and any changes require using heavy machinery to break up the pavement.
Materials: Our fixed speed bumps are typically made of heavy-duty rubber, asphalt, or plastic and can withstand loads of up to 30 metric tons. Our portable speed bumps are typically made of PP/PVC and may wear out or become loose under prolonged exposure to high-volume traffic. Their load-bearing capacity is approximately 15–20 metric tons.
Applications
JACKWIN portable speed bumps are applied for various occasions as follows:
JACKWIN portable speed bumps control vehicle speed through their high visibility and the conversion of kinetic energy. Our speed bumps directly reduce vehicle speed by dissipating the kinetic energy of horizontal motion through their raised profile.
At the same time, our bumps subject the vehicle’s suspension system to intense, sudden shocks, forcing drivers to instinctively slow down.
Determine the placement location: Ensure it is on a straight, level section of road, at least 5 meters away from any intersection or crosswalk.
Assembling the modules: Extend the modules into a straight line using the provided levers. Connect the modules using bolts or interlocking clips.
Yes, JACKWIN portable speed bumps can be used on public and private roads, as well as in construction zones.
JACKWIN removable speed bumps are secured to the ground primarily through friction and hardware anchors.
Friction-Based Securing: Our removable speed bumps grip the road surface firmly thanks to high-friction, non-slip pads on the bottom, preventing vehicles from slipping as they drive over them.
Hardware Anchoring: Our bumps can also be secured to concrete and asphalt surfaces using steel nails, expansion bolts, or wedge bolts.
Yes, JACKWIN portable speed bumps can reduce vehicle speeds to 8–24 kilometers per hour, delineate low-speed zones, and guide traffic flow.
Since 2008, JACKWIN has been designing and manufacturing high-quality removable speed bumps for fire departments, emergency management agencies, and construction contractors. You can find our speed bumps on our official website, https://jackwinsafety.com/speed-bumps/.
JACKWIN temporary speed bumps are priced based on material and size. The heavier the material and the larger the size, the higher the price.